230
Check and clear of the alarm history
4.26 Check and clear of the alarm history
(1) Check for the alarm (major fault) history
Alarm history
Monitor/frequency setting
[Operation panel is used
for operation]
Parameter setting
[Parameter setting change]
[Operation for displaying alarm history]
Eight past alarms can be displayed with the setting dial.
(The latest alarm is ended by ".".)
When no alarm exists, is displayed.
Output current
Flickering
Output voltage
Flickering
Flickering
Flickering
Press the
setting
dial.
Press the
setting
dial.
Press the
setting
dial.
Energization time
Alarm history number
(The number of past alarms is displayed.)
Flickering
Output frequency
Flickering Flickering
To Next Page
Loading...
Need help?
General
