Mitsubishi QCPU (Q Mode) User Manual

A - 18 A - 18
How to Use This Manual
This manual is prepared for users to understand memory map, functions, programs and devices of the CPU
module when you use MELSEC-Q Series PLCs.
The manual is classified roughly into three sections as shown below.
(1) Chapters 1 and 2 Describe the outline of the CPU module and the system
configuration. The feature of CPU module and the basics
of the system configuration of CPU module are described.
(2) Chapters 3 to 6 Describe the performance specifications, executable
program, I/O No. and memory of the CPU module.
(3) Chapter 7 Describes the functions of the CPU modules.
(4) Chapter 8 Describes communication with intelligent function modules.
(5) Chapters 9 and 10 Describe parameters and devices used in the CPU
modules.
(6) Chapter 11 Describes the CPU module processing time.
(7) Chapter 12 Describes the procedure for writing parameters and
programs created at the GX Developer to the CPU module.
(8) Chapters 13 to 19 Describes an overview of the multiple PLC system, the
system configuration, the I/O numbers, communications
between CPU modules, and communications between I/O
modules and intelligent function modules.
REMARK
This manual does not explain the functions of power supply modules, base units,
extension cables, memory cards and batteries of CPU module.
For these functions, refer to the manual shown below.
• High Performance Model QCPU (Q Mode) User's Manual (Hardware Design,
Maintenance and Inspection)

Mitsubishi QCPU (Q Mode) Specifications

General

Brand	Mitsubishi
Model	QCPU (Q Mode)
Category	Controller
Language	English