Mitsubishi QCPU (Q Mode) User Manual

7 - 35 7 - 35
MELSEC-Q
7 FUNCTION
7.10 Writing in Program during High Performance model QCPU RUN
When the High Performance model QCPU is in the RUN status, you can write
programs or files in any of the following steps:
• Writing data in the circuit mode during RUN.
• Writing data by using pointers during RUN (see Section 7.13.2).
• Writing a batch of files during RUN.
7.10.1 Writing data in the circuit mode during RUN
(1) Writing data in the circuit mode during RUN Status
(a) Writing data in the circuit mode during RUN is a function to write a program
during the High Performance model QCPU RUN status.
(b) The program can be changed without stopping the process in High
Performance model QCPU program by performing writing data in the circuit
mode during RUN status.
X0 X2
X1
Y30
X3 X4
X5
SET
M10
END
GX Developer
(c) Writing program during RUN can be performed from a GX Developer
connected to another station in the network.
Personal computer
(
GX Develo
p
er
)
MELSECNET/H
Change by GX Developer and write in
High Performance model QCPU at the conversion.

Mitsubishi QCPU (Q Mode) Specifications

General

Brand	Mitsubishi
Model	QCPU (Q Mode)
Category	Controller
Language	English