Mitsubishi QCPU (Q Mode) User Manual

7 - 59 7 - 59
MELSEC-Q
7 FUNCTION
(b) The specified circuit of the pointer is displayed to write the circuit after
conversion during RUN.
The following is an example of GX Developer A writing during RUN from P0
and GX Developer B writing during RUN from P1. The program area
surrounded with
is the area to be written during RUN.
Serial
communication
module
P0
X0 X2
X1
Y30
P1
X3 X4
X5
SET
M10
END
Area after P1 in the processing
program is written during RUN.
P0
X0 X2
X1
Y30
P1
X3 X4
X5
SET
M10
END
Area after P0 in the processing
program is written during RUN.
Personal computer A
(GX Developer)
Personal computer B
(GX Developer)
(3) Precautions
Precautions on "write during RUN" is the same as precautions on "write during
RUN in the circuit mode" in Section 7.10.1. For further information, see Section
7.10.1.

Mitsubishi QCPU (Q Mode) Specifications

General

Brand	Mitsubishi
Model	QCPU (Q Mode)
Category	Controller
Language	English