7 - 74 7 - 74
MELSEC-Q
7 FUNCTION
(c) Parameter status
The "Parameter status" section shows the I/O number of each slot of a
base unit, module type, and the number of points. If the number of available
points and the installed status are displayed in any column of the
Parameter status section, make the setting so that I/O assignments of PLC
parameter can match the installed status.
(d) Overall Information
The Overall Information section shows the number of base units used and
the number of modules installed on the base.
(e) Base
The Base section indicates the status of base units used and modules
installed. The Module column indicates the status of a module when the
module is in an abnormal condition.
(f) PLC diagnostics
This button is used to monitor the status of the High Performance model
QCPU and an error.
(g) Module's Detailed Information
This button is used to view detailed information about a selected module.
For details on intelligent function modules, see the manual of an intelligent
function module.
To Next Page
Loading...
Need help?
General
