Getting Started 1 - 3
Parts
Figure 1-1
MC1000 Mobile Computer
Getting Started
To get the MC1000 up and running:
• install the rechargeable Li-ion battery or the optional AAA batteries
• charge the battery (rechargeable Li-ion battery only)
• start the mobile computer.
Main Battery Installation
The MC1000 uses either a rechargeable 1800 mAh Li-ion battery or three standard alkaline AAA batteries. Charge
the Li-ion battery before using the mobile computer. If the Li-ion battery is not charged, see Battery Charging on
page 1-5.
Li-ion Battery Installation
To install the Li-ion battery:
Scan LED
Scan Window
Battery Door
Battery Door
Latch
Keypad
Power
Button
Display
Scan
Button
Charge LED
SD Card Cover
Wrist Strap
Beeper