Motorola MC1000 Integrator Guide

Getting Started 1 - 9
AAA Batteries Removal
To remove the AAA batteries:
1. Press the red Power button to turn off the screen and place the mobile computer in suspend mode.
2. Pull back the two battery door latches.
3. Lift the battery door.
4. Remove the three AAA batteries from the mobile computer.
Figure 1-7 AAA Battery Removal
Spare Battery Charging
Use one of two accessories to charge spare Li-ion batteries. See to Chapter 2, Accessories for more information
on spare battery charging.
SD/SDIO Card
To install an SD memory card or an SDIO card:
1. Press the red Power button to turn off the screen and place the mobile computer in suspend mode.
2. Loosen the two captive screws securing the SD card cover.
NOTE Pulling back the left battery door latch places the mobile computer in suspend mode.
NOTE Zebra neither sells nor supports 3
rd
party SDIO products integrated into the MC1000. Zebra is not responsible
for the 3
rd
party SDIO card in-country regulatory certification. Customers must contact directly with the
selected 3
rd
party SDIO card vendors to ensure the vendor has obtained all the required regulatory
certifications for the targeted countries.

Motorola MC1000 Specifications

General

Brand	Motorola
Model	MC1000
Category	Handhelds
Language	English