Creating/Loading Hex Images 6 - 7
Downloading the Hex Image
Once the hex file is built, download it to the mobile computer.
Using a Serial or USB Connection
To load the hex files on to the mobile computer:
1. For downloads using either a serial or a USB connection, connect the mobile computer to the development
computer using the Single Slot Serial/USB cradle or MC1000 Communication/Charge cables.
2. Press and hold a yellow Scan button and the Power button simultaneously until the mobile computer resets
into IPL.
3. When the Initial Program Loader menu appears, release the scan button and Power button.
Figure 6-6 Initial Program Loader Menu
4. Choose Auto Select or use the up and down scroll buttons to select the partition to download, then press ENT.
CAUTION Ensure that power is applied to the mobile computer. To ensure a successful download, do not remove
power from the mobile computer while in IPL mode.
Initial Program Loader
Platform
Application
Windows CE
Monitor
Splash Screen
Power Micro
Partition Table
Command File
System Reset
Auto Select
To Next Page
Loading...
Need help?
General
