Forced Trunk Disconnect allows
you to disconnect (release) anoth-
er extension’s active outside call.
This is a powerful feature that
lets you access a busy line in an emergency — when no other
outside lines are available. Normally, Forced Trunk Disconnect is
reserved only for attendants and supervisors.
!! CAUTION !!
Forced Trunk Disconnect abruptly terminates the active call on
the outside line. Only use this feature in an emergency — when
no other outside lines are available.
To disconnect a busy outside line:
1. Press line key for busy outside line.
Line keys are red when busy.
OR
Press and dial the line’s Line Access Code (e.g.,
101 for line 1).
2. Dial to disconnect the line.
OR
Press + .
The line key goes out and you hear Intercom
dial tone.
To place a call after using Forced Trunk Disconnect:
You hear Intercom dial tone after step 2 above.
1. Hang up.
2. Press the line key and dial your number.
DISCMORE
101
Forced Trunk Disconnect
Disconnect a co-worker’s
outside call in an
emergency.
80000MFH07_02.qxd 6/2/04 9:39 AM Page 101
To Next Page
Loading...
Need help?
General
