NEC DS2000 Feature Handbook

174
Tandem Trunking
To Barge In on a tandem call:
Use this procedure to rejoin a Conference already
in progress.
1. Press line key for busy line.
OR
Press and dial the line’s Direct Line Access code
(e.g., 101 for line 1).
2. Dial or press .
BARG
Time and Date
The time and date appear on
all telephone displays in your
system. Follow the User
Programmable Feature steps referenced below if you need to reset
the system time and date (e.g., after the Daylight Savings Time
change).
User Programmable Feature
# T D
Change your system’s time and date. See User
Programmable Features at the end of this guide for more.
The time and date shows
on all telephone displays.
80000MFH07_02.qxd 6/2/04 9:39 AM Page 174

NEC DS2000 Specifications

General

Brand	NEC
Model	DS2000
Category	Telephone
Language	English