NEC iPasolink 200 User Manual

WIRING and FORMING 7-3
Installation NWD-107460-02E
Caution
Tighten the TNC-male connector of IF
cable to the IDU with engage connector
nut only using fingers and holding the
cable with another hand.
Tighten the engage connector nut only for
the L-angle connector also.
(Tightening Torque: 0.3 to 0.5 N
•m
(3 to 5 kg
•cm))
IDU
IDU
IF cable
IF cable
IDU
IF cable
Straight Type
L-Angle Type (*)
L Angle Type (*)
If rotate other parts of the
L-angle connector as illustrated left, it
can cause connector damaged.
(*) When using L-angle connector, pay
attention the following precaution to avoid
the connector damaged.
Submission Prohibited
NEC Internal Use Only

NEC iPasolink 200 Specifications

General

Brand	NEC
Model	iPasolink 200
Category	Network Hardware
Language	English