NETGEAR GS716T User Manual

Field Description
MAC Address The MAC Address to which the multicast MAC address is related.
To search by MAC address, enter the address with the MFDB table entry you want
displayed. Enter six two-digit hexadecimal numbers separated by colons, for
example 00:0f:43:67:89:AB, and then click Go. If the address exists, that entry will
be displayed. An exact match is required.
VLAN ID The VLAN ID to which the multicast MAC address is related.
Component This is the component that is responsible for this entry in the Multicast Forwarding
Database. Possible values are IGMP Snooping or Static Filtering.
Type This displays the type of the entry. Static entries are those that are configured by the
end user. Dynamic entries are added to the table as a result of a learning process or
protocol.
Description The text description of this multicast table entry. Possible values are Management
Configured, Network Configured, and Network Assisted.
Interface The list of interfaces that are designated for forwarding (Fwd) and filtering (Flt) for
the selected address.
Forwarding Interfaces The resultant forwarding list is derived from combining all the forwarding interfaces
and removing the interfaces that are listed as the static filtering interfaces.
119
GS716T and GS724T Gigabit Smart Switches
The following table describes the fields in the MFDB Table.
Click Refresh to update the information on the screen with the most current data.

NETGEAR GS716T Specifications

General

Switch type	Managed
Switch layer	L3
Quality of Service (QoS) support	Yes
Stackable	-
Certification	CE, FCC, VCCI, EN, C-Tick, CCC, CSA, UL/cUL, IEC
Product color	Blue
LED indicators	Activity, Link, Power
SFP module slots quantity	2
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	16
Number of VLANs	256
Networking standards	IEEE 802.1D, IEEE 802.1as, IEEE 802.1s, IEEE 802.1v, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Copper ethernet cabling technology	10BASE-T, 100BASE-TX, 100BASE-T, 1000BASE-T
Noise level	0 dB
Mean time between failures (MTBF)	567680 h
DHCP features	DHCP client
Security algorithms	802.1x RADIUS, HTTPS, SSL/TLS
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	14.4 W
MAC address table	16000 entries
Number of static routes	32
Operating altitude	0 - 3000 m
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	0 - 90 %
Cables included	AC
Supported network protocols	IP

Weight and Dimensions

Depth	204 mm
Width	440 mm
Height	43 mm
Weight	2570 g