NETGEAR GS716T User Manual

9
1
1. Switch Information and Setup
The NETGEAR
®
GS716T and GS724T Smart Switch Software Administration Manual describes
how to configure and operate the GS716T and GS724T Gigabit Smart Switches by using the
Web-based graphical user interface (GUI). This manual describes the software configuration
procedures and explains the options available within those procedures.
Document Organization
The GS716Tv2 and GS724Tv3 Software Administration Manual contains the following
chapters:
• Chapter 1, Switch Information and Setup, contains information about performing the
initial system configuration and accessing the user interface.
• Chapter 2, System Information Features, describes how to configure administrative
features such as SNMP, DHCP, and port information.
• Chapter 3, Switching Features, describes how to manage and monitor the layer 2
switching features.
• Chapter 4, Quality of Service Features, describes how to manage the Access Control
Lists (ACLs), and how to configure Differentiated Services and Class of Service features.
• Chapter 5, Device Security, contains information about configuring switch security
information such as port access control and RADIUS server settings.
• Chapter 6, Monitoring the System, describes how to view a variety of information about
the switch and its ports, and to configure how the switch monitors events.
• Chapter 7, Maintenance, describes features to help you manage the switch.
• Chapter 8, Help, describes how to access Online Help resources for the switch.
• Appendix A, Hardware Specifications and Default Values, contains hardware
specifications and default values on the GS716T and GS724T Smart Switches.
• Appendix B, Configuration Examples, contains examples of how to configure various
features on the GS716T and GS724T Smart Switches, such as VLANs and ACLs.
• Appendix C, Notification of Compliance contains regulatory information about the
GS716T and GS724T switch.

NETGEAR GS716T Specifications

General

Switch type	Managed
Switch layer	L3
Quality of Service (QoS) support	Yes
Stackable	-
Certification	CE, FCC, VCCI, EN, C-Tick, CCC, CSA, UL/cUL, IEC
Product color	Blue
LED indicators	Activity, Link, Power
SFP module slots quantity	2
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	16
Number of VLANs	256
Networking standards	IEEE 802.1D, IEEE 802.1as, IEEE 802.1s, IEEE 802.1v, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Copper ethernet cabling technology	10BASE-T, 100BASE-TX, 100BASE-T, 1000BASE-T
Noise level	0 dB
Mean time between failures (MTBF)	567680 h
DHCP features	DHCP client
Security algorithms	802.1x RADIUS, HTTPS, SSL/TLS
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	14.4 W
MAC address table	16000 entries
Number of static routes	32
Operating altitude	0 - 3000 m
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	0 - 90 %
Cables included	AC
Supported network protocols	IP

Weight and Dimensions

Depth	204 mm
Width	440 mm
Height	43 mm
Weight	2570 g