NETGEAR GS716T User Manual

187
GS716T and GS724T Gigabit Smart Switches
Secure HTTP Configuration
Secure HTTP enables the transmission of HTTP over an encrypted Secure Sockets Layer
(SSL) or Transport Layer Security (TLS) connection. When you manage the switch by using
a Web interface, secure HTTP can help ensure that communication between the
management system and the switch is protected from eavesdroppers and man-in-the-middle
attacks.
Use the Secure HTTP Configuration page to configure the settings for HTTPS
communication between the management station and the switch.
To display the Secure HTTP Configuration page, click Security
 Access, and then click the
HTTPS
 HTTPS Configuration link.
To configure HTTPS settings:
1. Use the radio buttons in the HTTPS Admin Mode field to enable or disable the
Administrative Mode of Secure HTTP.
The currently configured value is shown when the Web page is displayed. The default
value is Disable. You can only download SSL certificates when the HTTPS Admin mode
is disabled.
2. Use the radio buttons in the SSL Version 3 field to enable or disable Secure Sockets Layer
Version 3.0. The currently configured value is shown when the Web page is displayed. The
default value is Enable.
3. Use the radio buttons in the TLS Version 1 field to enable or disable Transport Layer
Security Version 1.0. The currently configured value is shown when the Web page is
displayed. The default value is Enable.
4. In the HTTPS Port field, specify the TCP port to use for HTTPS data. The value must be in
the range of 1–65535. Port 443 is the default value. The currently configured value is shown
when the Web page is displayed.
5. In the HTTPS Session Soft Timeout field, specify the number of minutes an HTTPS
session can be idle before a timeout occurs.

NETGEAR GS716T Specifications

General

Switch type	Managed
Switch layer	L3
Quality of Service (QoS) support	Yes
Stackable	-
Certification	CE, FCC, VCCI, EN, C-Tick, CCC, CSA, UL/cUL, IEC
Product color	Blue
LED indicators	Activity, Link, Power
SFP module slots quantity	2
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	16
Number of VLANs	256
Networking standards	IEEE 802.1D, IEEE 802.1as, IEEE 802.1s, IEEE 802.1v, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Copper ethernet cabling technology	10BASE-T, 100BASE-TX, 100BASE-T, 1000BASE-T
Noise level	0 dB
Mean time between failures (MTBF)	567680 h
DHCP features	DHCP client
Security algorithms	802.1x RADIUS, HTTPS, SSL/TLS
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	14.4 W
MAC address table	16000 entries
Number of static routes	32
Operating altitude	0 - 3000 m
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	0 - 90 %
Cables included	AC
Supported network protocols	IP

Weight and Dimensions

Depth	204 mm
Width	440 mm
Height	43 mm
Weight	2570 g