NETGEAR GS716T User Manual

261
GS716T and GS724T Gigabit Smart Switches
2. If you are downloading an GS716T and GS724T image (Code), select the image on the
switch to overwrite. This field is only visible when Code is selected as the File Type.
Note: It is recommended that you not overwrite the active image. The
system will display a warning that you are trying to overwrite the
active image.
3. Click Browse to open a file upload window to locate the file you want to download.
4. Click Cancel to cancel the operation on the screen and reset the data on the screen to the
latest value of the switch.
5. Click the Apply button to initiate the file download.
Note: After a file transfer is started, please wait until the page refreshes.
When the page refreshes, the Select File option will be blanked out.
This indicates that the file transfer is done.
File Management
The system maintains two versions of the GS716T and GS724T software in permanent
storage. One image is the active image, and the second image is the backup image. The
active image is loaded during subsequent switch restarts. This feature reduces switch down
time when upgrading or downgrading the GS716T and GS724T software.
The File Management menu contains links to the following options:
• Dual Image Configuration on page 261
• Dual Image Status on page 263
Dual Image Configuration
The system running a legacy software version will ignore (not load) a configuration file
created by the newer software version. When a configuration file created by the newer
software version is discovered by the system running an older version of the software, the
system will display an appropriate warning to the user.
Use the Dual Image Configuration page to set the boot image, configure an image
description, or delete an image.
To display the Dual Image Configuration page, click Maintenance  File Management  Dual
Image
 Dual Image Configuration.

NETGEAR GS716T Specifications

General

Switch type	Managed
Switch layer	L3
Quality of Service (QoS) support	Yes
Stackable	-
Certification	CE, FCC, VCCI, EN, C-Tick, CCC, CSA, UL/cUL, IEC
Product color	Blue
LED indicators	Activity, Link, Power
SFP module slots quantity	2
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	16
Number of VLANs	256
Networking standards	IEEE 802.1D, IEEE 802.1as, IEEE 802.1s, IEEE 802.1v, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Copper ethernet cabling technology	10BASE-T, 100BASE-TX, 100BASE-T, 1000BASE-T
Noise level	0 dB
Mean time between failures (MTBF)	567680 h
DHCP features	DHCP client
Security algorithms	802.1x RADIUS, HTTPS, SSL/TLS
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	14.4 W
MAC address table	16000 entries
Number of static routes	32
Operating altitude	0 - 3000 m
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	0 - 90 %
Cables included	AC
Supported network protocols	IP

Weight and Dimensions

Depth	204 mm
Width	440 mm
Height	43 mm
Weight	2570 g