NETGEAR GS716T User Manual

123
GS716T and GS724T Gigabit Smart Switches
To configure the multicast router settings:
1. Select the check box associated with each interface you want to configure. Select the
check box in the heading row to apply the same settings to all interfaces.
2. Use Multicast Router to enable or disable Multicast Router on the selected interfaces.
3. Click APPLY to update the switch with the changes.
4. Click CANCEL to abandon the changes.
Multicast Router VLAN Configuration
This page configures the interface to only forward the snooped IGMP packets that come from
the specified VLAN to the multicast router attached to this interface. The configuration is not
needed most of the time since the switch will automatically detect the presence of a multicast
router and forward IGMP packets accordingly. It is only needed when you want to make sure
that the multicast router always receives IGMP packets from the switch in a complex network.
To access the Multicast Router VLAN Configuration page, click Switching
 Multicast  IGMP
Snooping
 Multicast Router VLAN Configuration.
To configure the multicast router VLAN settings:
1. Select the check box associated with each interface you want to configure. Select the
check box in the heading row to apply the same settings to all interfaces.
2. Use VLAN ID to select the VLAN ID for which the Multicast Router Mode is to be Enabled
or Disabled.
3. Use Multicast Router to enable or disable multicast router for the VLAN ID.
4. Click APPLY to update the switch with the changes.
5. Click CANCEL to abandon the changes.

NETGEAR GS716T Specifications

General

Switch type	Managed
Switch layer	L3
Quality of Service (QoS) support	Yes
Stackable	-
Certification	CE, FCC, VCCI, EN, C-Tick, CCC, CSA, UL/cUL, IEC
Product color	Blue
LED indicators	Activity, Link, Power
SFP module slots quantity	2
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	16
Number of VLANs	256
Networking standards	IEEE 802.1D, IEEE 802.1as, IEEE 802.1s, IEEE 802.1v, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Copper ethernet cabling technology	10BASE-T, 100BASE-TX, 100BASE-T, 1000BASE-T
Noise level	0 dB
Mean time between failures (MTBF)	567680 h
DHCP features	DHCP client
Security algorithms	802.1x RADIUS, HTTPS, SSL/TLS
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	14.4 W
MAC address table	16000 entries
Number of static routes	32
Operating altitude	0 - 3000 m
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	0 - 90 %
Cables included	AC
Supported network protocols	IP

Weight and Dimensions

Depth	204 mm
Width	440 mm
Height	43 mm
Weight	2570 g