EasyManuals Logo
Home>NETGEAR>Switch>GS716T

NETGEAR GS716T User Manual

NETGEAR GS716T
303 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #130 background imageLoading...
Page #130 background image
130
GS716T and GS724T Gigabit Smart Switches
Dynamic Address Configuration
Use the Dynamic Addresses page to set the amount of time to keep a learned MAC address
entry in the forwarding database. The forwarding database contains static entries, which are
never aged out, and dynamically learned entries, which are removed if they are not updated
within a given time.
To access the Configuration page, click Switching
Address Table Advanced Dynamic
Addresses.
To configure the Dynamic Address setting:
1. Specify the number of seconds the forwarding database should wait before deleting a
learned entry that has not been updated. IEEE 802.1D-1990 recommends a default of
300 seconds. You may enter any number of seconds between 10 and 1000000. The
factory default is 300.
Note: IEEE 802.1D recommends a default of 300 seconds, which is the
factory default.
2. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
3. Click Apply to apply to send the updated configuration to the switch. Configuration changes
take effect immediately.

Table of Contents

Other manuals for NETGEAR GS716T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR GS716T and is the answer not in the manual?

NETGEAR GS716T Specifications

General IconGeneral
Switch typeManaged
Switch layerL3
Quality of Service (QoS) supportYes
Stackable-
CertificationCE, FCC, VCCI, EN, C-Tick, CCC, CSA, UL/cUL, IEC
Product colorBlue
LED indicatorsActivity, Link, Power
SFP module slots quantity2
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity16
Number of VLANs256
Networking standardsIEEE 802.1D, IEEE 802.1as, IEEE 802.1s, IEEE 802.1v, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Copper ethernet cabling technology10BASE-T, 100BASE-TX, 100BASE-T, 1000BASE-T
Noise level0 dB
Mean time between failures (MTBF)567680 h
DHCP featuresDHCP client
Security algorithms802.1x RADIUS, HTTPS, SSL/TLS
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)14.4 W
MAC address table16000 entries
Number of static routes32
Operating altitude0 - 3000 m
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 50 °C
Storage relative humidity (H-H)0 - 95 %
Operating relative humidity (H-H)0 - 90 %
Cables includedAC
Supported network protocolsIP
Weight and Dimensions IconWeight and Dimensions
Depth204 mm
Width440 mm
Height43 mm
Weight2570 g

Related product manuals