NETGEAR GS716T User Manual

143
GS716T and GS724T Gigabit Smart Switches
MSRP Streams Information
Use the MSRP Stream Information page to view information about MSRP streams flowing
through each interface. To display the MSRP Stream Information page click the Switching
tab, then click MRP  Advanced  MSRP Stream Information.
The following table describes the fields on the MSRP Stream Information page.
Field Description
Stream ID A 16-bit unsigned integer value, Unique ID, used to distinguish among
multiple streams sourced by the same system.
Stream Source MAC Address Identifies the MAC address of the traffic stream’s source.
Received Accumulated
Latency
The 32-bit unsigned Accumulated Latency component is used to
determine the worst-case latency that a Stream can suffer in its path
from the Talker to a given Listener. It starts as a 0 in a Talker Advertise
Declaration at the Talker, and its value is increased by each Bridge as
the Talker Advertise Declaration propagates through the network.
Traffic Class Identifies whether the stream is Class A or Class B. Class A traffic has
a higher priority than Class B traffic.
Rank The 5-bit unsigned Rank component is used by systems to decide
which streams can and cannot be served, when the MSRP
registrations exceed the capacity of a Port to carry the corresponding
data streams. If a Bridge becomes oversubscribed (e.g. network
reconfiguration, 802.11 bandwidth reduction) the Rank will also be used
to help determine which Stream or Streams can be dropped. A lower
numeric value is more important than a higher numeric value.

NETGEAR GS716T Specifications

General

Switch type	Managed
Switch layer	L3
Quality of Service (QoS) support	Yes
Stackable	-
Certification	CE, FCC, VCCI, EN, C-Tick, CCC, CSA, UL/cUL, IEC
Product color	Blue
LED indicators	Activity, Link, Power
SFP module slots quantity	2
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	16
Number of VLANs	256
Networking standards	IEEE 802.1D, IEEE 802.1as, IEEE 802.1s, IEEE 802.1v, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Copper ethernet cabling technology	10BASE-T, 100BASE-TX, 100BASE-T, 1000BASE-T
Noise level	0 dB
Mean time between failures (MTBF)	567680 h
DHCP features	DHCP client
Security algorithms	802.1x RADIUS, HTTPS, SSL/TLS
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	14.4 W
MAC address table	16000 entries
Number of static routes	32
Operating altitude	0 - 3000 m
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	0 - 90 %
Cables included	AC
Supported network protocols	IP

Weight and Dimensions

Depth	204 mm
Width	440 mm
Height	43 mm
Weight	2570 g