NETGEAR GS716T User Manual

146
GS716T and GS724T Gigabit Smart Switches
To configure the global 802.1AS settings on the switch:
1. Enable or disable 802.1AS globally on the switch. The default mode is Enable.
2. Configure the Priority1 value of the local clock (this time-aware bridge).
3. Configure the Priority2 value of the local clock (this time-aware bridge).
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
5. If you make any changes to the page, click Apply to retain the changes to the system.
The following table shows the non-configurable information on the 802.1AS Configuration
page.
Field Description
GrandMaster Present Identifies whether Grand Master Clock is present. The default is False.
Best Clock Identity Shows the Best Clock Identity detected by this time-aware bridge.
Best Clock Priority1 Shows the Priority1 value of the best clock on the switch.
Best Clock Priority2 Shows the Priority2 value of the best clock on the switch.
Steps to Best Clock Shows the number of links in the path from the Best Clock to this
time-aware bridge. If this time-aware bridge is the best, the value is
zero.
Local Clock Identity Shows the Clock Identity of this time-aware bridge.

NETGEAR GS716T Specifications

General

Switch type	Managed
Switch layer	L3
Quality of Service (QoS) support	Yes
Stackable	-
Certification	CE, FCC, VCCI, EN, C-Tick, CCC, CSA, UL/cUL, IEC
Product color	Blue
LED indicators	Activity, Link, Power
SFP module slots quantity	2
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	16
Number of VLANs	256
Networking standards	IEEE 802.1D, IEEE 802.1as, IEEE 802.1s, IEEE 802.1v, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Copper ethernet cabling technology	10BASE-T, 100BASE-TX, 100BASE-T, 1000BASE-T
Noise level	0 dB
Mean time between failures (MTBF)	567680 h
DHCP features	DHCP client
Security algorithms	802.1x RADIUS, HTTPS, SSL/TLS
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	14.4 W
MAC address table	16000 entries
Number of static routes	32
Operating altitude	0 - 3000 m
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	0 - 90 %
Cables included	AC
Supported network protocols	IP

Weight and Dimensions

Depth	204 mm
Width	440 mm
Height	43 mm
Weight	2570 g