NETGEAR GS716T User Manual

Field Description
Chassis ID Subtype The type of information used to identify the GS716T and GS724T in the
Chassis ID field.
Chassis ID The hardware platform identifier for the GS716T and GS724T.
System Name The user-configured system name for the GS716T and GS724T.
System Description The device description, which includes information about the product model
and platform.
System Capabilities The primary function(s) the GS716T and GS724T supports.
69
GS716T and GS724T Gigabit Smart Switches
If LLDP or LLDP-MED is enabled on one or more ports, the Device Information table
displays information about the device that is transmitted in TLVs, as the following table
describes:
The Port Information table provides information about the LLDP and LLDP-MED status of
each port, as the following table describes:
Field Description
Interface Select the interface with the information to display.
Port ID Subtype Identifies the type of data displayed in the Port ID field.
Port ID Identifies the physical address of the port.
Port Description Identifies the user-defined description of the port. To configure the Port
Description, see Ports on page 79.
Advertisement Displays the advertisement status of the port.
Click Refresh to refresh the page with the most current data from the switch.

NETGEAR GS716T Specifications

General

Switch type	Managed
Switch layer	L3
Quality of Service (QoS) support	Yes
Stackable	-
Certification	CE, FCC, VCCI, EN, C-Tick, CCC, CSA, UL/cUL, IEC
Product color	Blue
LED indicators	Activity, Link, Power
SFP module slots quantity	2
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	16
Number of VLANs	256
Networking standards	IEEE 802.1D, IEEE 802.1as, IEEE 802.1s, IEEE 802.1v, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Copper ethernet cabling technology	10BASE-T, 100BASE-TX, 100BASE-T, 1000BASE-T
Noise level	0 dB
Mean time between failures (MTBF)	567680 h
DHCP features	DHCP client
Security algorithms	802.1x RADIUS, HTTPS, SSL/TLS
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	14.4 W
MAC address table	16000 entries
Number of static routes	32
Operating altitude	0 - 3000 m
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	0 - 90 %
Cables included	AC
Supported network protocols	IP

Weight and Dimensions

Depth	204 mm
Width	440 mm
Height	43 mm
Weight	2570 g