Nikon T-RCP User Manual

I Preparations
5 Setting Foot Switch Function
- 22 -
5
Setting Foot Switch Function
Allocate an electrical component to the foot switch.
1
Press the MODE key, and the SETTING MENU screen will
appear on the LCD.
Select “More” using the S key or the T key and then
press the [

] key.
ＳＥＴＴＩＮＧ ＭＥＮＵ
Ｏｂｊｅｃｔｉｖｅ
Ｃｏｎｄｅｎｓｅｒ
Ｆｉｌｔｅｒ
Ｅｘｃｉｔｅｒ
Ｂａｒｒｉｅｒ
Ｃｏｍｂｉｎａｔｉｏｎ（Ｏｂｊ．＞Ｃｏｎｄｅｎｓｅｒ）
Ｃｏｍｂｉｎａｔｉｏｎ（Ｆｉｌｔｅｒ＞ＥＸ／ＢＡ）
Ｍｏｒｅ
2
Select “Foot Switch” using the S key or the T key and
then press the [

] key.
ＭＯＲＥ
Ｒｏｔａｔｉｏｎ Ｓｔｏｐｐｅｒ
Ｆｏｃｕｓ
Ｏｔｈｅｒ Ｕｎｉｔ
Ｒｅｍｏｔｅ Ｃｏｎｔｒｏｌ Ｐａｄ
Ｓｈｕｔｔｅｒ Ｋｅｙ
Ｆｏｏｔ Ｓｗｉｔｃｈ
Ｃｏｍｍｕｎｉｃａｔｉｏｎ Ｄｅｌｉｍｉｔｅｒ
3
Move the cursor using the S key or the T key and select
an electrical component.
ＦＯＯＴ ＳＷＩＴＣＨ
Ｕｎｕｓｅｄ
Ｒｅｖｏｌｖｉｎｇ ｎｏｓｅｐｉｅｃｅ
Ｃｏｎｄｅｎｓｅｒ ｃａｓｓｅｔｔｅ
Ｆｉｌｔｅｒ ｂｌｏｃｋ
Ｅｘｃｉｔｅｒ ｆｉｌｔｅｒ
Ｂａｒｒｉｅｒ ｆｉｌｔｅｒ
ＡＵＸ ｆｉｌｔｅｒ
4
Press the MODE key to end the setting and to return to the
OPERATION screen.
Note:
If a component is not connected, you cannot select the component.
If the selected electrical component is disconnected while the OPERATION screen is displayed on the LCD, the
component is automatically set to “Unused.”

Nikon T-RCP Specifications

General

Brand	Nikon
Model	T-RCP
Category	Remote Control
Language	English