Nikon T-RCP User Manual

VI Maintenance Menu
6 Resetting HUB Controller Settings to Default Values
- 65 -
VI
6 Resetting HUB Controller Settings to Default Values
Use this function to reset the data stored in the memory of the HUB controller back to the default values. For
example, the memory stores information on the attached objectives, registered optional data of optical members,
and information on the interlocking of the revolving nosepiece and the condenser module changeover (See Table
2).
1
Turn on the power to the HUB controller while holding
down the MODE key.
After the MAINTENANCE MENU screen appears, release
the MODE key.
Select “HUB Data” using the
S key or the T key and
press the [

] key.
ＭＡＩＮＴＥＮＡＮＣＥ ＭＥＮＵ
１．Ｖｅｒｓｉｏｎ
２．ＴＥＳＴ１
３．ＴＥＳＴ２
４．ＰＡＤ Ｄａｔａ
５．
ＨＵＢ Ｄａｔａ
６．Ｃｏｎｔｒｏｌ Ｄａｔａ
ａ．Ａｌｌ Ｃｏｎｔｒｏｌ Ｄａｔａ
ｂ．Ｒｅｖｏｉｖｉｎｇ Ｎｏｓｅｐｉｅｃｅ
ｃ．Ｃｏｎｄｅｎｓｅｒ Ｃａｓｓｅｔｔｅ
ｄ．Ｌｉｇｈｔ Ｐａｔｈ
ｅ．Ｆｉｌｔｅｒ Ｂｌｏｃｋ
ｆ．Ｅｘｃｉｔｅｒ Ｆｉｌｔｅｒ
ｇ．Ｂａｒｒｉｅｒ Ｆｉｌｔｅｒ
ｈ．ＡＵＸ Ｆｉｌｔｅｒ
2
A confirmation message appears.
Select “Yes” using the W key or the X key and press the
[

] key.
If you select “No” and press the [

] key, the display will
return to the MAINTENANCE MENU screen.
ＨＵＢ ＤＡＴＡ
Ｉｎｉｔｉａｌｉｚｅ ＨＵＢ ｄａｔａ ？
Ｙｅｓ Ｎｏ
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
Ｓｅｌｅｃｔ Ｙｅｓ
ａｎｄ ｐｒｅｓｓ ｅｎｔｅｒ ｔｏ ｓｔａｒｔ．
3
When the following message appears, turn on the power
again.
“Please re-switch on a power supply.”
ＨＵＢ ＤＡＴＡ
Ｉｎｉｔｉａｌｉｚｅ ＨＵＢ ｄａｔａ ？
Ｙｅｓ Ｎｏ
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
Ｒｕｎｎｉｎｇ．．．
[Table 2] Settings Stored in HUB Controller Memory and Default Settings
Menu option Default setting
SETTING MENU
Addresses 16
Not attached
Objective
Optional data Not registered
Addresses 15
Not attached
Condenser
Optional data Not registered
Addresses 16
Not attached
Optional data (filter block) Not registered
Filter
Optional data (dichroic mirror) Not registered
Addresses 18
Not attached
Exciter
Optional data (excitation filter) Not registered
Addresses 18
Not attached
Barrier
Optional data (barrier filter) Not registered
Combination（OBJ.>...
Addresses 16
Not interlocked
Combination（Filter.
Addresses 16
Not interlocked

Nikon T-RCP Specifications

General

Brand	Nikon
Model	T-RCP
Category	Remote Control
Language	English