Nikon T-RCP User Manual

I Preparations
6 Indicating Z-Axis Position
- 23 -
I
6
Indicating Z-Axis Position
Indication of the z-axis position is set to “OFF” by default.
To indicate the z-axis position, edit the setting using the following procedure. (If TE2000-U or TE2000-S is used,
the Z-Axis Position cannot be indicated.)
1
Press the MODE key, and the SETTING MENU screen will
appear on the LCD.
Select “More” using the S key or the T key and then
press the [

] key.
ＳＥＴＴＩＮＧ ＭＥＮＵ
Ｏｂｊｅｃｔｉｖｅ
Ｃｏｎｄｅｎｓｅｒ
Ｆｉｌｔｅｒ
Ｅｘｃｉｔｅｒ
Ｂａｒｒｉｅｒ
Ｃｏｍｂｉｎａｔｉｏｎ（Ｏｂｊ．＞Ｃｏｎｄｅｎｓｅｒ）
Ｃｏｍｂｉｎａｔｉｏｎ（Ｆｉｌｔｅｒ＞ＥＸ／ＢＡ）
Ｍｏｒｅ
2
Select “Remote Control Pad” using the S key or the T
key and then press the [

] key.
ＭＯＲＥ
Ｒｏｔａｔｉｏｎ Ｓｔｏｐｐｅｒ
Ｆｏｃｕｓ
Ｏｔｈｅｒ Ｕｎｉｔ
Ｒｅｍｏｔｅ Ｃｏｎｔｒｏｌ Ｐａｄ
Ｓｈｕｔｔｅｒ Ｋｅｙ
Ｆｏｏｔ Ｓｗｉｔｃｈ
Ｃｏｍｍｕｎｉｃａｔｉｏｎ Ｄｅｌｉｍｉｔｅｒ
3
Select “Z-Position” using the S key or the T key and
select “ON” using the PREV or NEXT key.
ＲＥＭＯＴＥ ＣＯＮＴＲＯＬ ＰＡＤ
Ｄｉｓｐｌａｙ
Ｏｂｊｅｃｔｉｖｅ ：［ＯＮ ］
Ｃｏｎｄｅｎｓｅｒ ：［ＯＮ ］
Ｆｉｌｔｅｒ ：［ＯＮ ］
Ｅｘｃｉｔｅｒ ：［ＯＮ ］
Ｂａｒｒｉｅｒ ：［ＯＮ ］
ＤＩＡ Ｌａｍｐ ：［ＯＮ ］
Ｚ－Ｐｏｓｉｔｉｏｎ ：［
ＯＮ ］
Ｂｕｚｚｅｒ ：［ＯＮ ］
Ｒｅｍｏｔｅ Ｃｏｎｔｒｏｌ：［ＯＮ ］
ＬＣＤ ：［ＯＦＦ］
4
Press the MODE key to end the setting and to return to the
OPERATION screen.

Nikon T-RCP Specifications

General

Brand	Nikon
Model	T-RCP
Category	Remote Control
Language	English