Oki MB760 Service Manual

45641001TH Rev.1
3-20 /
Oki Data CONFIDENTIAL
3.10.3 Functions
[A] 1. Revert factory initial status HDD
 SelectthistodisposeoftheADI-HDDaswellastheequipment.
 Whenthisitemisselected,alldataintheHDDaredeletedandtheHDDisrevertedtoits
initial status at the factory shipment.
 Thisoperationrequiresonlyafewseconds;however,youmustcreatethepartitioninthe
HDD in the 3C mode (Format HDD) and reinstall the HDD data in the 49 mode to make the
HDD reusable.
 When“1”isselectedandthen[START]buttonispressed,themenubelowappears.Tostart,
press the [START] button.
HDD Assist Mode
Current HDD type: ADI HDD
Select number (1-2) and press START key
1. Revert factory initial status HDD
2. Remove key
System Firmware Version
Update Mode
: xxxx(x.x.x.x)
: 4c Mode
=>
Confirmation Screen
Are you sure ???
Press START to continue
Press STOP to cancel
Fig. 3-10
 Whentheoperationisnished,theresultappearsonthemenu.
HDD Assist Mode
Current HDD type: ADI HDD
Select number (1-2) and press START key
1. Revert factory initial status HDD
2. Remove key
System Firmware Version
Update Mode
: xxxx(x.x.x.x)
: 4c Mode
=>
Data in the HDD has been complately erased.
Press SoftPower Key to Switch Off
Fig.5-1
Note:
Iftheequipmentisstartedinthenormalmodewiththiscondition,anHDDmountingerror
occurs.

Oki MB760 Specifications

General

Brand	Oki
Model	MB760
Category	All in One Printer
Language	English