- 21 -
1. Basic Operations
You can use a macro by reading out it.
1
Press the (JOB MACRO) button on the operator panel.
2
Press the or button to select the macro you want to use and press the
button.
3
Check that [Execute] is selected, and then press the (OK) button.
If the access control is enabled on the functions you want to use, a message is
displayed to inform you that you are not permitted to use them, and the screen returns
to the JOB MACRO menu.
4
Perform a job.
You can edit a macro title.
1
Press the (JOB MACRO) button on the operator panel.
2
Press the or button to select the macro you want to edit and press the
button.
3
Press the button to select [Title Edit] and press the (OK) button.
4
Press the (OK) button.
5
Enter a new title.
Entering Characters (User's Manual)
6
Select [Enter], and then press the (OK) button.
Using a Registered Macro Editing a Macro Title
To Next Page
Loading...
Need help?
General
