- 29 -
2. Copy
You can select the appropriate size of the document to be scanned.
1
Press the (COPY) button on the operator panel.
2
Set a document in the ADF or on the document glass.
3
Press the button.
4
Check that [Scan Size] is selected, and then press the button.
5
Press the or button to select the paper size, and then press the
(OK) button.
6
Press the (MONO) or (COLOR) button.
The sort function is enabled by factory default.
1
Press the (COPY) button on the operator panel.
2
Set a document in the ADF or on the document glass.
• Continuous Scan mode enables you to copy multiple documents at once.
• You can use both the ADF and document glass for copying multiple documents as a single job.
Enabling Continuous Scan Mode (Continuous Scan)
3
Press the button.
4
Press the or button to select [Sort] and press the button.
5
Press the or button to select [ON] and press the (OK) button.
6
Press the button to go back to the standby screen.
7
Enter the number of copies.
8
Press the (MONO) or (COLOR) button.
Changing the Scan Size (Scan Size) Sorting Each Set in Page Order (Sort)
To Next Page
Loading...
Need help?
General
