Omron R88D-1SN10F-ECT User Manual

3 - 137
3 Specifications
AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT® Communications User’s Manual (I586)
3-8 Noise Filter Specifications
3
3-8-3 Terminal Block Specifications
*1. Select a noise filter in accordance with the amount of the leakage current. If there is no problem with the
amount of the leakage current, you can select the R88A-FI1S202.
*2. Use wires with a rated voltage of 600 V or higher.
*3. An example of using heat-resistant polyvinyl chloride insulated wires (HIV) at the ambient temperature of
50°C.
 R88A-FI1S1
 R88A-FI1S2/-FI1S3
3-phase
400 VAC
R88D-
1SN06F-ECT
R88A-
FI1S309
9 Arms 27 mA
(at 400 VAC
60 Hz, with
Y-connec-
tion and a
phase loss)
2.9 kg AWG 16 to 14,
1.25 to 2.5 mm
2
8 to 9 mm
R88D-
1SN10F-ECT
R88D-
1SN15F-ECT
R88D-
1SN20F-ECT
R88D-
1SN30F-ECT
AWG 14,
2.0 to 2.5 mm
2
3-8-3 Terminal Block Specifications
Symbol Name Remarks
L1 Main circuit
power sup-
ply input
---
NC
L2
Protective
earth (PE)
Screw: M4, Tightening torque: 1.2 N·m
Wire size: 3.5 mm
2
(AWG 12) min.
Symbol Name Remarks
L1 Main circuit
power sup-
ply input
---
L2
L3
Protective
earth (PE)
Screw: M4, Tightening torque: 1.2 N·m
Wire size: 3.5 mm
2
(AWG 12) min.
Applicable Servo Drive Noise filter
Wire on power supply
side
*2
Voltage Model Model
Rated
current
Leakage
current
Weight
Wire size
*3
Strip
length

Omron R88D-1SN10F-ECT Specifications

General

Brand	Omron
Model	R88D-1SN10F-ECT
Category	Controller
Language	English