12 - 15
12 Troubleshooting
AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT® Communications User’s Manual (I586)
12-5 Troubleshooting
12
12-5 Troubleshooting
If an error occurs in the Servo Drive or operation, identify the cause of the error and take appropriate
measures as shown below.
• For the error occurrence, check its frequency, timing, and the environment in which the error
occurred.
• You can reduce errors that occur temporarily by taking noise countermeasures such as wiring a thick
ground wire as short as possible.
• For details on noise countermeasures, refer to 4-3 Wiring Conforming to EMC Directives on page
4-47.
To Next Page
Loading...
Need help?
General
