Omron VARISPEED V7 User Manual

126
 Setting Frequency by Current Reference Input
Never input a voltage reference to control circuit terminal FR
when DIP switch SW2 is switched to the “I” side. The
Inverter might be damaged.
VI
SW2
SW2
When setting the frequency by
inputting a current reference (4 to
20 mA or 0 to 20 mA) from the
control circuit terminal FR, switch
the DIP switch SW2 on the con-
trol circuit board to the “I” side.
NOTE

Omron VARISPEED V7 Specifications

General

Brand	Omron
Model	VARISPEED V7
Category	Inverter
Language	English