Omron VARISPEED V7 User Manual

6 Programming Features
133
 Stall Prevention during Operation
Stall Prevention above Base Speed during Run (n115)
The stall prevention level can be decreased automatically in the constant
output range.
n115 Settings
Acceleration/Deceleration Time Selection during Stall Pre-
vention (n116)
With this function, Acceleration Time 2 (n021) and Deceleration Time
2 (n022) can be fixed as the acceleration/deceleration time when mov-
ing to prevent stalling during operation.
Constant
No.
Name Unit Setting
Range
Factory
Setting
n115 Stall Prevention above
Base Speed during Run
- 0=Disabled
1=Enabled
0
Setting Function
0 The stall prevention level is the level set for constant n094
in all frequency areas.
1 The following figure shows how the stall prevention level is
automatically decreased in the constant output range
(Max. frequency > Max. Voltage Output Frequency
(n013)).
The lower limit is 40% of the set value of n094.
Constant
No.
Name Unit Setting
Range
Factory
Setting
n116 Acceleration/Deceleration
Time Selection during
Stall Prevention
- 0=Disabled
1=Enabled
0
Constant Output Area
Operation Level
n094
40% of n094
n013
Output Frequency
Lower Limit
n094
Max. Voltage Output Frequency n013
Operation Level
Output Frequency

Omron VARISPEED V7 Specifications

General

Brand	Omron
Model	VARISPEED V7
Category	Inverter
Language	English