Omron VARISPEED V7 User Manual

234
 Constants List
First Functions (Constants n001 to n049)
No. Register
No. for
Trans-
mission
Name Setting Range Setting Unit Factory
Setting
Change
during
Opera-
tion
User
Set-
ting
Ref.
Page
001 0101H Password 0 to 6,
12, 13
-1No53
002 0102 Control Mode Selection
(Note 6)
0, 1 - 0
(Note 1,
6)
No 59
003 0103 Run Command Selection 0 to 3 - 0 No 64
004 0104 Frequency Reference
Selection
0 to 9 - 1 No 65
005 0105 Stopping Method Selection 0, 1 - 0 No 106
006 0106 Reverse Run Prohibit 0, 1 - 0 No 74
007 0107 Stop Key Selection 0, 1 - 0 No 98
008 0108 Frequency Reference
Selection in Local Mode
0, 1 - 0
(Note 5)
No 65
009 0109 Frequency Reference Setting
Method from Digital Operator
0, 1 - 0 No 65
010 010A Detecting Fault Contact of
Digital Operator
0, 1 - 0 No 64
011 010B Max. Output Frequency 50.0 to 400.0
Hz
0.1 Hz 50.0 Hz No 55
012 010C Max. Voltage 0.1 to 255.0 V
(Note 2)
0.1 V 200.0 V
(Note 2)
No 55
013 010D Max. Voltage Output
Frequency
0.2 to 400.0 Hz 0.1 Hz 50.0 Hz No 55
014 010E Mid. Output Frequency 0.1 to 399.9 Hz 0.1 Hz 1.3 Hz
(Note 6)
No 55
015 010F Mid. Output Frequency
Voltage
0.1 to 255.0 V
(Note 2)
0.1 V 12.0 V
(Note 2,
6)
No 55
016 0110 Min. Output Frequency 0.1 to 10.0 Hz 0.1 Hz 1.3 Hz
(Note 6)
No 55
017 0111 Min. Output Frequency
Voltage
0.1 to 50.0 V
(Note 2)
0.1 V 12.0 V
(Note 2,
6)
No 55
018 0112 Selecting Setting Unit for Ac-
celeration/deceleration Time
0, 1 - 0 No 79

Omron VARISPEED V7 Specifications

General

Brand	Omron
Model	VARISPEED V7
Category	Inverter
Language	English