Omron VARISPEED V7 User Manual

178
 Software No. Display
The software number of the Inverter for which constants are stored in
the Digital Operator is displayed.
Example: Displaying Software No. of Inverter for which Constants are
Stored in EEPROM in Digital Operator
* Displays the lower 4 digits of the software version.
Explanation Operator Display
• Enable the
setting for
constants
n001 to
n179.
• Press and
will light.
• Press to display
the set value.
• Change the set value to 4
by pressing the or key.
• Press .
(May be a different constant number)
(Lit)
(May be a different set value.)
(Flashes)
(Lit for one second.)
↓
(The constant number is displayed.)
• Execute
Software
No. Dis-
play (Sno)*
using the
Constant
Copy Func-
tion Selec-
tion (n176).
• Change the constant num-
ber to n176 by pressing the
or key.
• Press to display
the set value.
(Lit)
• Change the set value to Sno
by pressing the or key.
(Lit)
• Press .
(Lit)
(Software version: for example
VSP010013)
• Press or .
(The constant number is displayed.)
DSPL
PRGM
ENTER
ENTER
ENTER
ENTER
DSPL
ENTER

Omron VARISPEED V7 Specifications

General

Brand	Omron
Model	VARISPEED V7
Category	Inverter
Language	English