Omron VARISPEED V7 User Manual

176
While a constant number that is not the same is displayed or a constant
value is displayed, press to interrupt the execution of the
verification. End will be displayed. Press or to return
to the constant number display.
 Inverter Capacity Display
The voltage class and maximum applicable motor capacity for which
constants are stored in the Digital Operator are displayed.
Example: Displaying Voltage Class and Maximum Applicable Motor
Capacity for Inverter whose Constants are in EEPROM in
Operator
Explanation Operator Display
• Enable the
setting for
constants
n001 to
n179.
• Press and
will light.
• Press to display
the set value.
• Change the set value to 4
by pressing the or
key.
• Press .
(May be a different constant number)
(Lit)
(May be a different set value.)
(Flashes)
(Lit for one second.)
↓
(The constant number is displayed.)
• Execute
Inverter
Capacity
Display
(vA) using
the Con-
stant Copy
Function
Selection
(n176).
• Change the constant num-
ber to n176 by pressing the
or key.
• Press to display
the set value.
(Lit)
• Change the set value to vA
by pressing the or
key.
(Lit)
• Press .
• Press or
.
(Lit) (For 20P7)*
(The constant number is displayed.)
STOP/RESET
DSPL
ENTER
DSPL
PRGM
ENTER
ENTER
ENTER
ENTER
DSPL
ENTER

Omron VARISPEED V7 Specifications

General

Brand	Omron
Model	VARISPEED V7
Category	Inverter
Language	English