Omron VARISPEED V7 User Manual

170
 READ Function
Reads out the constants in batch from the Inverter and stores them in
EEPROM inside the Digital Operator. When the read-out is executed,
the previously stored constants data in the EEPROM are cleared and
replaced with the newly entered constants.
Example: Storing Constants from Inverter in EEPROM in Operator
Explanation Operator Display
• Enable the set-
ting of con-
stants n001 to
n179.
• Press and
will light.
• Press to dis-
play the set value.
• Change the set value to
4 by pressing the or
key.
• Press .
(May be a different constant number)
(Lit)
(May be a different set value.)
(Flashes)
(Lit for one second.)
↓
(The constant number is displayed.)
• Set Constant
Read Prohibited
Selection
(n177) to read-
enabled.
*1
• Change the constant No.
to n177 by pressing the
or key.
• Press to dis-
play the set value.
• Change the set value to
1 by pressing the or
key.
• Press .
(Lit)
(Flashes)
(Lit for one second.)
↓
(The constant number is displayed.)
DSPL
PRGM
ENTER
ENTER
ENTER
ENTER

Omron VARISPEED V7 Specifications

General

Brand	Omron
Model	VARISPEED V7
Category	Inverter
Language	English