Oracle Database Appliance X6-2-HA User Manual

Servicing CRUs That Require Server Node Power Off
132 Oracle Database Appliance Service Manual • June 2017
Servicing CRUs That Require Server Node Power Off
This section describes how to service customer-replaceable units (CRUs) for Oracle Database
Appliance Version 1. If you have Oracle Database Appliance X6-2 series, go to “Servicing
Oracle Database Appliance X6-2 Series CRUs” on page 77. If you have Oracle Database
Appliance X3-2, Oracle Database Appliance X4-2, or Oracle Database Appliance X5-2, go to
“Servicing Oracle Database Appliance X3-2/X4-2/X5-2 CRUs” on page 78.
This section includes information on how to service the following Oracle Database Appliance
Version 1 CRUs:
■
“Server Node CRU Component Locations” on page 132
■
“Servicing Memory Modules (DIMMs) (CRU)” on page 133
■
“Servicing PCIe Risers (CRU)” on page 143
■
“Servicing PCIe Cards (CRU)” on page 147
■
“Servicing the Server Node Battery (CRU)” on page 156
Server Node CRU Component Locations
Note - Information in this appendix does NOT apply to Oracle Database Appliance X3-
2, Oracle Database Appliance X4-2, Oracle Database Appliance X5-2 or Oracle Database
Appliance X6 series. Refer to the preceding chapters in this document for information on
servicing those systems.
Each server node (also called a system controller) in Oracle Database Appliance Version 1
includes the following replaceable components.

Oracle Database Appliance X6-2-HA Specifications

General

Brand	Oracle
Model	Database Appliance X6-2-HA
Category	Storage
Language	English