Oracle Database Appliance X6-2-HA User Manual

Enable or Disable Option ROM Settings
228 Oracle Database Appliance Service Manual • June 2017
7.
Press F10 to save the changes and exit BIOS.
Configuring Option ROM Settings in BIOS
Note - Information in this appendix does NOT apply to Oracle Database Appliance X3-
2, Oracle Database Appliance X4-2, Oracle Database Appliance X5-2 or Oracle Database
Appliance X6 series. Refer to the preceding chapters in this document for information on
servicing those systems.
The Oracle Database Appliance Version 1 BIOS Option ROM space is 128 Kbytes. Of these
128 Kbytes, approximately 80 Kbytes are used by the VGA controller, the disk controller, and
the network interface card. Approximately 48 Kbytes remain to be shared by the Option ROMs
on all bootable PCI-Express plug-in cards.
Enable or Disable Option ROM Settings
Note - Information in this appendix does NOT apply to Oracle Database Appliance X3-
2, Oracle Database Appliance X4-2, Oracle Database Appliance X5-2 or Oracle Database
Appliance X6 series. Refer to the preceding chapters in this document for information on
servicing those systems.
1.
Access the BIOS Setup Utility menus.
For instructions, see “Accessing the BIOS Setup Utility Menus” on page 230.
2.
In the BIOS Setup Utility menus, use the arrow keys (or Tab key) to navigate to
the Boot menu.

Oracle Database Appliance X6-2-HA Specifications

General

Brand	Oracle
Model	Database Appliance X6-2-HA
Category	Storage
Language	English