Configure TPM Support in BIOS
AppendixA • Servicing the Oracle Database Appliance Version 1 225
The updated Trusted Computing screen appears and shows that the Execute TPM Command
setting has changed to Enabled.
8.
Press F10 to save the changes and exit the BIOS Setup Utility.
9.
To verify that TPM support is configured, do the following:
a.
Reboot the server node.
b.
To enter the BIOS Setup Utility, press the F2 key while the system is
performing the power-on self-test (POST).
When BIOS is started, the main BIOS Setup Utility top-level screen appears.
c.
Select Advanced, then select Trusted Computing and press Enter.
The updated Trusted Computing screen appears.
To Next Page
Need help?
General