113
5. 6K/4K Photo and Drive Settings
Taking Pictures using Burst Mode
Applicable modes:
Pictures are taken continuously while the shutter button is pressed.
1
Set the drive mode dial to [ ].
2
Focus on the subject and take a picture.
• Hold down the shutter button fully to activate the Burst Mode.
∫ Setting the burst rate
Select the menu. (P55)
¢1 Number of recordable pictures
¢2 When recording is performed under the test conditions specified by Panasonic.
The burst speed will become slower halfway. However, pictures can be taken until the
capacity of the card becomes full. Depending on recording conditions, the number of burst
pictures that can be taken will be reduced.
• The burst speed may become slower depending on the following settings.
– [Picture Size] (P206)/[Quality] (P207)/[Sensitivity] (P107)/Focus Mode (P88)/[Focus/Release
Priority] (P226)
> [Rec] > [Burst Rate]
[H]
(High speed)
[M]
(Middle speed)
[L]
(Low speed)
Burst speed
(pictures/second)
12 (AFS/MF)
9 (AFF/AFC)
72
Live View during Burst Mode
None (AFS/MF)
Available (AFF/AFC)
Available Available
¢1
With RAW files 60 or more
¢
2
Without RAW files 600 or more
¢
2
To Next Page
Loading...
Need help?
General
