Firmware Ver. 2.3
F-28
1 Press 2/1 to select a picture group.
2 Press 4.
• You can perform the same operation by touching [ ],
etc.
• To return to the picture selection screen, press 4 again, or
touch [ ].
Select the smartphone function with which you want to shorten the time required to wake
the camera from [Sleep Mode].
• Set [Bluetooth] and [Remote Wakeup] to [ON] in advance.
• The battery level indicated on the screen is approximate. The exact level varies depending on
the environment and the operating conditions.
When shown in full screen, the display can be enlarged up to approx. 20k.
Pictures in a group can now be selected for RAW processing
> [Playback] > [RAW Processing]
[Returning from Sleep Mode] has been added to [Bluetooth] in the [Setup] menu
> [Setup] > [Bluetooth] > [Returning from Sleep Mode]
[Remote / Transfer
Priority]
Shortens the time required to wake the camera with [Remote operation] or
[Transfer image].
[Shutter Remote
Priority]
Shortens the time required to wake the camera with [Shutter Remote
Control].
The battery indication has been modified
75% or higher
74% to 50%
49% to 25%
24% or below
Blinking in red
Low battery
• The status indicator also blinks.
• Recharge the battery or replace it with a fully charged battery.
MF Assist can now be displayed enlarged up to approx. 20t
MENU
MENU
To Next Page
Loading...
Need help?
General
