283
10. Using the Wi-Fi/Bluetooth function
Synchronise the clock and the time zone setting of the camera with those of a
smartphone.
1 Make a Bluetooth connection to the smartphone. (P268)
2 Select the camera’s menu. (P55)
• The [Clock Set] setting and the [Home] or [Destination] setting in [World Time], which are
all located in the [Setup] menu, will be synchronised with the corresponding settings of the
smartphone.
• To disable the automatic synchronization of the clock, set [Auto Clock Set] to [OFF] on the
camera.
Save the camera’s setup information to a smartphone. Since saved setup information can
be imported to cameras, you can apply the same setup to more than one camera.
1 Make a Bluetooth connection to the smartphone. (P268)
2 Operate the smartphone.
Synchronising the camera’s clock with a smartphone
Wireless connectivity required:
> [Setup] > [Bluetooth] > [Auto Clock Set] > [ON]
Saving the camera’s setup information to a smartphone
Wireless connectivity required:
1 Select [ ].
2 Select [ ].
3 Save or load setup information.
• Read the [Help] in the “Image App” menu for further details on how to operate.
When transferring setup information, the camera automatically makes a Wi-Fi
connection.
• (iOS devices) Depending on the connection status of the smartphone, you may need to
change the connected device on the Wi-Fi setup screen. Follow the on-screen message on
the smartphone to change the setting.
• Only the setup information for this model can be loaded.
• You can save or load the setup information of items identical to those in [Save/Restore
Camera Setting] in the [Setup] menu.
MENU
To Next Page
Loading...
Need help?
General
