10. Using the Wi-Fi/Bluetooth function
300
• When [Via Network] is selected, except for the first-time connection, the camera will connect to
the previously-used wireless access point. To change the connection destination, press [DISP.].
• WPS refers to a function that allows you to easily configure the settings related to the
connection and security of wireless LAN devices.
For details about the compatibility and operation of the function, refer to the operating
instructions for the wireless access point.
Connecting via a wireless access point (via the network)
[WPS (Push-Button)]
Press the WPS button on the wireless access point to set up a
connection.
Press the wireless access point
WPS button until it switches to WPS
mode.
e.g.:
[WPS (PIN code)]
Enter a PIN code into the wireless access point to set up a
connection.
1 On the camera screen, select the wireless access
point you are connecting to.
2 Enter the PIN code displayed on the camera screen
into the wireless access point.
3 Press [MENU/SET] of the camera.
[From List]
Select this option when you are not sure about the WPS
compatibility, or when you want to search for and connect to a
wireless access point. (P301)
To Next Page
Loading...
Need help?
General
