313
11. Connecting to other equipment
Preparations:
Install “PHOTOfunSTUDIO” to the PC. (P311)
1
Connect the computer and camera with the USB connection cable
(supplied).
• Please turn on this unit and your PC before connecting.
• Hold the plug, and plug the cable straight in or pull it straight out.
(It may result in malfunction by the deforming of the terminal if it is plugged in obliquely.)
Do not connect devices to incorrect terminals. Doing so may cause malfunction.
• Do not use any other USB connection cables except the supplied one.
(The USB connection cable supplied with DMC-GH3 or DMC-GH4 cannot be
used.)
A USB socket (Type C)
B USB connection cable (supplied)
2
Press 3/4 to select [PC], and then press [MENU/SET].
• If [USB Mode] (P239) is set to [PC] in the [Setup] menu in advance, the camera will be
automatically connected to the PC without displaying the [USB Mode] selection screen.
3
Copy the images to a PC using “PHOTOfunSTUDIO”.
• Do not delete or move copied files or folders in Windows Explorer.
When viewing in “PHOTOfunSTUDIO”, you will not be able to play back or edit.
Transferring images to a PC
• Use a battery with sufficient battery power or the AC adaptor (optional). If the remaining
battery power becomes low while the camera and the PC are communicating, the status
indicator blinks and the alarm beeps.
Disconnect the USB connection cable safely. Otherwise, data may be destroyed.
• Before inserting or removing a card, turn the camera off and disconnect the USB connection
cable. Otherwise, data may be destroyed.
To Next Page
Loading...
Need help?
General
