2. Getting Started/Basic Operations
34
Attaching/Removing the Lens
• Check that the camera is turned off.
• Change lenses where there is not a lot of dirt or dust. Refer to P340 when dirt or dust gets on
the lens.
1
Turn the lens rear cap A and the body cap B in the direction of the
arrow to detach them.
2
Align the lens fitting marks C and then rotate the lens in the direction
of the arrow until it clicks.
• Do not press the lens release button D when you attach a lens.
• Do not try to attach the lens when holding it at an angle to the camera body as the lens
mount may get scratched.
Attaching the lens
To Next Page
Loading...
Need help?
General
