F-21
Firmware Ver. 2.0
The menu item below has been added. It sets the item to be assigned to the control dial while
the recording screen is displayed.
¢1 A function that sets the aperture value is assigned when the camera is set to Manual
Exposure Mode. If it is set to a mode other than Manual Exposure Mode, a function that
compensates the exposure is assigned.
¢2 When the Auto Focus Mode is set to [š], [ ], [ ] or [Ø], a function that adjusts the AF
area size is assigned. When the Auto Focus Mode is set to [ ] or Manual Focus is used, a
function that changes the magnification factor of the assist screen is assigned.
The items below have been added.
• Press the function button assigned with [Operation Lock] to disable the operations.
The recording screen displays guide lines aligned with the angle of view to be used when you
crop motion pictures with editing software on your PC.
Settings: [2.39:1]/[2.35:1]/[16:9]/[1:1]/[OFF]
[Dial Set.]
Changes to a menu item
> [Custom] > [Operation] > [Dial Set.]
[Control Dial
Assignment]
[ ] ([Headphone Volume])/[ / ] ([Exposure / Aperture])
¢ 1
/
[ ] ([Exposure Comp.])/[ ] ([Sensitivity])/
[ ] ([Focus Frame Size])
¢ 2
[Operation Lock Setting]
Changes to a menu item
> [Custom] > [Operation] > [Operation Lock Setting]
[DISP. Button] Disables the functions of the [DISP.] button.
[Video Guide Line]
New menu item
> [Custom] > [Monitor / Display] > [Video Guide Line]
MENU
MENU
To Next Page
Loading...
Need help?
General
