305
10. Using the Wi-Fi/Bluetooth function
[Wi-Fi Setup] Menu
Configure the settings required for the Wi-Fi function.
The settings cannot be changed when connected to Wi-Fi.
Select the menu. (P55)
Sets either the camera or the smartphone as the priority control device to be used during
remote recording. (P276)
You can improve security by enabling password entry for a direct connection to a
smartphone.
• When [ON] is selected, you can also set up a connection by scanning a QR code. (P271)
Acquires or changes the “LUMIX CLUB” login ID. (P296)
You can set the workgroup.
To send images to a PC, a connection to the same workgroup as the destination PC is
required.
(The default setting is “WORKGROUP”.)
1 Press [MENU/SET].
2 Enter the workgroup of the connecting PC.
• For information on how to enter characters, refer to P64.
• Pressing [DISP.] will return the default setting.
> [Setup] > [Wi-Fi] > [Wi-Fi Setup]
[Priority of Remote Device]
[Wi-Fi Password]
[ON] Connects the camera and a smartphone using an SSID and password. (P271)
[OFF] Connects the camera and a smartphone using an SSID. (P270)
[LUMIX CLUB]
[PC Connection]
MENU
To Next Page
Loading...
Need help?
General
