285
10. Using the Wi-Fi/Bluetooth function
Sending images
When sending images, select the method for sending them
after selecting [New Connection] in [Wi-Fi Function] in [Wi-Fi]
in the [Setup] menu.
∫ Images that can be sent
¢1 Sending by [Send Images While Recording] is not available.
¢2 A motion picture recorded in [AVCHD] can be sent to [PC] if the file size is 4 GB or smaller. It
cannot be sent if the size is greater than 4 GB.
¢3 Excluding motion pictures recorded with their size set to [4K] in [Rec Quality]
• Some images may not be played back or sent depending on the device.
• Refer to the manual of the destination equipment or the web service for more information on
how to playback pictures.
A picture can be automatically sent to a specified device every time you take it.
• While sending a file, [ ] is displayed on the recording screen.
• To terminate the connection, follow the steps below:
> [Setup] > [Wi-Fi] > [Wi-Fi Function] > [Yes]
• You cannot change the sending settings while sending pictures.
Destination JPEG RAW MP4
¢1
AVCHD
¢1, 2
MP4(LPCM),
MOV
6K/4K Burst File
¢1
Images recorded with the
Post Focus function
¢1
[Smartphone] (P287) ± — ±
¢3
—— —
[PC] (P290) ±± ± ± ±
¢1
±
[Cloud Sync. Service]
(P295)
± — ±
¢3
—— —
[Web service] (P292) ± — ±
¢3
—— —
[AV device] (P289) ± —— — — —
[Printer]
¢1
(P288) ± —— — — —
Send Images While Recording
• Since the camera gives priority to recording, sending may take longer during the recording.
• If you cancel the transmission before its completion by, for example, terminating the Wi-Fi
connection, unsent files will not be resent.
• You may not be able to delete files or use the playback menu while sending.
To Next Page
Loading...
Need help?
General
