104
English
■ [Function button guide]
Sets the function display when numeric buttons are
pressed. Set this for each function group.
[Off]:
Does not display the function list. Operation starts
when numeric buttons are pressed.
[On]:
Displays the function list for the numeric buttons.
Note
●
When <FUNCTION> is pressed, [Function button
guide] will be displayed regardless of the [On] / [Off]
settings.
■ To use shortcut (numeric buttons)
1
Press <FUNCTION> or <1> ‒ <6>.
[Function button guide] will be displayed.
[Function button guide]: When [Off] is set, pressing
the numeric button starts operation.
Example: Input
1
2
3
4
5
6
Input
HDMI1
HDMI2
HDMI3
PC
MEMORY VIEWER
WHITEBOARD
2
Press <FUNCTION> to switch function
group.
Example: Memory load
1
2
3
4
5
6
MEMORY1
MEMORY2
MEMORY3
MEMORY4
MEMORY5
MEMORY6
Memory load
3
Press <1> ‒ <6>.
The function for the pressed button starts to operate.
Example: When <2> is pressed.
Memory load
Load from “MEMORY2”
Ok Cancel
Device operation mode settings
Configure the settings for a device connected to the
TOUCH (USB) terminal on the front.
[Device operation mode settings] - submenu screen
Device operation mode settings
Auto input change setting
Off
Auto setting
On
■ [Auto setting]
When it is set to [On], device operation mode is
automatically set when a device is connected to the
[TOUCH (USB)] terminal.
Device operation mode is canceled by the following
operation:
•
The device is disconnected from TOUCH (USB)
terminal.
•
The input is switched to another.
•
[Touch screen settings] - [Touch screen] is set to
[Off]. (see page 76)
■ [Auto input change setting]
The input is switched to the specified input when
device operation mode is set
Off (no switching) / HDMI1 / HDMI2 / HDMI3 /
DisplayPort / DVI-D / PC
Color universal design settings
Sets COLOR UNIVERSAL DESIGN
About COLOR UNIVERSAL DESIGN (CUD)
COLOR UNIVERSAL DESIGN is a design made in
consideration of colorations to allow information to be
accurately conveyed to people who see color differently
from ordinary people (congenital colour weakness,
senile cataract, glaucoma, etc.).
[Color universal design settings] - submenu screen
Color universal design settings
Save
Color universal design
Off
Set [On] or [Off] and select [Save].
[Off]: A color palette different from that used when
[Color universal design] is set to [On] is used.
[On]: The color palette for COLOR UNIVERSAL
DESIGN is used.
Function names for which “red letters”
are used in the menus of this Display are
displayed in “white letters”.
To Next Page
Loading...
Need help?
General