26
English
Command
Command Parameter Control details
PON None Power ON
POF None Power OFF
AVL
＊＊＊
Volume000‒100
AMT
0 Audio MUTE OFF
1 Audio MUTE ON
IMS
None Input select (toggle)
HM1
HDMI IN 1 input
(HDMI1)
HM2
HDMI IN 2 input
(HDMI2)
HM3
HDMI IN 3 input
(HDMI3)
DP1
DisplayPort IN input
(DisplayPort)
DV1
DVI-D IN input
(DVI-D)
SL1 SLOT input (SLOT)
PC1 PC IN input (PC)
NW1
Screen Transfer
input
(Screen Transfer)
UD1 USB input (USB)
MV1
“Memory viewer”
input
(MEMORY VIEWER)
WB1
WhiteBoard input
(WHITEBOARD)
DAM
None
Screen mode select
(toggle)
FULL Full
NORM Normal
NATV Native
HFIT H fit
VFIT V fit
ZOOM Zoom1
ZOM2 Zoom2
Note
●
If multiple commands are transmitted, be sure to wait
for the response for the first command to come from
this unit before sending the next command.
●
If an incorrect command is sent by mistake, this unit
will send an “ER401” command back to the computer.
●
When sending a command which does not require
parameter, a colon (:) is not needed.
●
Consult your local Panasonic dealer for detail
instructions on command usage.
For more details, visit the following web site.
https://panasonic.net/cns/prodisplays/
AUDIO OUT terminal connection
Note
●
Audio equipment and the cable shown are not
supplied with this set.
line-in
Stereo mini
plug (M3)
Stereo audio cable (commercially available)
Audio equipment
Note
●
To output sound from AUDIO OUT terminal of the
unit, be sure to set [Output select] in the [Sound]
menu to [AUDIO OUT]. (see page 69)
To Next Page
Loading...
Need help?
General