109
English
Quick input change mode
Sets the mode to switch the input at high speed.
[Off]:
Switches the input in normal mode.
[On]:
Switches the input in high speed mode between
the following inputs.
[HDMI1] / [HDMI2] / [DisplayPort] / [DVI-D] / [SLOT]
Note
●
Switching at high speed is possible only when the
types of signals are the same between inputs.
●
When switching the input at high speed, as for the
values of the position, size and image menu, images
are once displayed with the setting values for the
terminal before switching, and then images are
displayed with the setting values for the terminal after
switching.
DIGITAL AV OUT setting
Set the resolution of pictures output from the DIGITAL
AV OUT terminal
[Auto]:
The resolution suitable for the connected device is
automatically selected and used for output.
[4K(2160p)]:
Output at 3860 x 2160p @ 60 Hz or 50 Hz.
[1080p]:
Output at 1920 x 1080p @ 60 Hz or 50 Hz.
Note
●
The output frequency (60 Hz/50 Hz) cannot be
selected. It depends on the frequency of the video
signal input to this Display.
To Next Page
Loading...
Need help?
General