USER MANUAL
Peplink Balance Series
21.9 Reboot
This page provides a Reboot button for restarting the system.
For highest reliability, Peplink Balance series are equipped with two copies of firmware of different version.
You can select the firmware version you would like the device to reboot with.
The firmware marked with (Running) is the current system boot up firmware.
Please note that a firmware upgrade will always replace the inactive firmware partition.
22 Tools
22.1 Ping Test
The Ping Test tool in Peplink Balance performs Pings through a specified Ethernet interface or a
SpeedFusion
TM
VPN connection (VPN connections are only available on Peplink Balance 210 or above).
You can specify the number of pings in the fieldNumber of timesto a maximum of 10 times, and Packet
Size can be specified in the fieldPacket Size to a maximum of 1472 bytes.
The Ping utility is located at System> Tools > Ping, illustrated as follows:
http://www.peplink.com -171 / 207 - Copyright © 2013 Peplink
To Next Page
Loading...
Need help?
General
